With performance kits for the models 750i and 760 Li, MANSORY supplies the core part of the tuning programme. The kits consist of an optimised engine electronics combined with a sports air filter. 360 kW / 490 hp and 720 Nm torque with the 750i as well as 470 kW / 640 hp and 920 Nm torque with the 760Li. The optimised MANSORY 760 Li accelerates from 0 to 60 mph in 4,2 seconds making it 0,4 seconds faster than its serial counterpart.

MANSORY offers a combination of wheels to enhance appearance. The one-part polished rims are 22 inches and are 10 inches wide matched with high-performance tyres measuring 265/35 at the front and 295/30 at the rear.

A highlight of the interior design is the ergonomically re-designed sports steering wheel. Carbon or burl wood, leather or ultra-suede. The MANSORY upholstery department can produce personalised floor mat sets to entire leather equipment. MANSORY Switzerland AG solely offers its own modifying kit and does not trade or sell entire cars.

"Black Bison" is named from its powerful body line designed by WALD International and this word reminds us of the Bison galloping across the wasteland bravely. This aggressive face line looks like the Bison which has held up through some desperate struggle.

The 7-Series Sports Line Black Bison Edition includes a body kit consisting of a new front bumper with LED daytime running lights, side skirts which can be had either short or long, a new rear bumper with LED brake lights and roof and trunk spoilers.

Wald fits the 7-Series with its own set of wheels too, with Wald Renovatio R13 22-inch rims.

There's also a new exhaust system fitted with quad oval pipes emitting from the rear skirt in a "muffler cutter" design - meaning the double pipes overlap - a distinguishing touch. More info on Wald Japan.

The fact that LUMMA Design has a sense of BMW’s design language already becomes apparent in the front spoiler bumper. The curvature of the bonnet and the kidney front grille find their match in the new LUMMA front, which integrates grid inserts, fog lights and LED daytime running lights. The new shapely look is completed by the cup spoiler sword.

The ten-piece wheels arch extensions are key to the new sporty appearance: the luxury limousine becomes significantly wider, ensuring a dominant appearance. The door attachments and rear apron corners make for harmonious integration of the extension set and the full aerodynamics package.

LUMMA Design offers a set of deep door-sills that has been designed especially for the BMW 7 Series with its extended wheelbase, so as to bridge the parametrization of the wheels arch extensions.

The aerodynamics package is completed by the new rear diffuser. Besides ensuring additional downforce, the diffuser highlights the sporty aspiration of the refined limousine.

The dynamic appearance of the LUMMA BMW is enhanced even further by the genuine carbon applications produced by the refining experts in Germany. These include exterior mirror caps, the kidney front grille frame, all door handle covers, the boot lid trim and the four-piece pillar trim set for doors and mud guards.

Naturally the wheels also contribute to the more sporty appearance. The impressive 22-inch light alloy rims are fitted with 265/30 high-performance Vredestein tyres in the front and 295/25 in the rear.

In addition, selected LUMMA Design improvements make for an upgraded interior. The aluminium two-piece pedal set with matching footrest provides the driver footwell with a superior look. Foot mats in the colour of the customer’s choice featuring the embroidered LUMMA crest logo are also available for the large BMW, as is a boot mat in any colour, also featuring the embroidered logo.

Except for the deep door-sills, which are provided exclusively for the model with extended wheelbase, the construction extension, carbon applications, wheels and interior components fit all BMW 7 Series models. Obviously the required TÜV approval is included in every LUMMA Design delivery. Alternatively, the upgrade experts will perform the conversion at their head office in Winterlingen, Germany, including TÜV registration.

For additional information on the 7 Series product range and all LUMMA Design offers, please visit www.lumma-design.com

The Vorsteiner Package enhances the shape and form of the BMW 7 Series with the addition of the VR-7 Carbon Fiber Add-On Front Spoiler, the VR-7 Carbon Fiber Add-On Rear Spoiler, and the change to VR-7 Carbon Fiber Replacement Rear Diffuser.

The VR-7 Add-On Front Spoiler lends its more aggressive lines to the front fascia of the elegant 7 Series giving the vehicle a more commanding front profile and sense of sportiness. Not only does the VR-7 Add-On Front Spoiler provides for a more prominent and confident tone in the overall front-end design but it also adds an increase in front-end downforce and stability.

The VR-7 Replacement Diffuser takes on a new motif, featuring subtle contours, edges, and indentations that complement the body lines of the new 750i yet contribute to its new sportive attitude . Its bold undertones perfectly embody Vorsteiner's traditional of blending purpose, function, and distinctive style.

The featured BMW 750i is equipped with 21 inch Vorsteiner V-102 Forged Monoblock wheels highlighting a concave split five-spoke design that extends to the outer edge of the wheel, which continues to exemplify Vorsteiner's goal to create a stature of sportiness. The front and rear wheel dimensions are more assertive and measure in at 21" x 9" (front) and 21" x 10.5" (rear). The wheels shown are fitted with Vorsteiner recommended Michelin Pilot Sport PS2 tires. Tire Specs come in at 255/30-21 for the front and 285/30-21 for the rear. The stance of the vehicle was further enhanced by H&R's super sport suspension package, lowering it by 48 mm.

The V-102 is available in the following finishes:

* Brushed Aluminum
* Chrome
* Gunmetal
* Black
* Silver
* Textured Black
* Texture Gunmetal

Custom finishes are available on request.

The V-102 includes Vorsteiner anodized aluminum carbon fiber center caps.

With the VR7 Sportiv Aero Package and additional components Vorsteiner continues it's efforts to provide products that will raise the standards of performance and elegance of already great driving machines.

For more information on our BMW F01 7 Series Aero Package, please visit our website at: www.vorsteiner.com

The G-POWER manufactory is a strongly growing business branch of the company G-POWER in which all individually produced complete vehicles, the so-called “G-POWER Supercars” are produced as an inherent part of the G-PWER programme and are entirely made by hand.

The company philosophy of the G-POWER manufactory which solely produces its automobiles in limited edition, is 100% customer dedication as far as the features and the strictly limited edition of the G-POWER Supercars are concerned and also the entire revision of the individual basic engines with the clear objective to produce the strongest and fastest BMW model in the world.

The latest masterpiece and an impressive example for the exceptional performance of the G-POWER manufactory is the G-POWER 760i STORM which now closes a gap in the BMW programme: M-Feeling for the BMW “Luxusliner“.

G-POWER 760i STORM

• 725 hp / 533 KW at 5,500 r.p.m (+ 181 hp / 133 kW)
• 1000 Nm from 2,000 r.p.m (+ 250 Nm)
• V-max: 345 km/h
• 0-100 km/h: 4,2s
• 0-200 km/h: 11,9s
• Complete vehicle G-POWER 760i STORM F01: from € 365,000 (net) / Complete vehicle G-POWER 760iL STORM F02: from € 375,000 (net)

Due to customer preference, G-POWER, so far predominantly well known on modifying the potent BMW M models, has now focused on the BMW flagship in the luxury segment and developed an overall concept which optimally adjusts aerodynamics, rims and increased engine performance.

The core part of the G-POWER performance enhancement for the 6,0l V12 bi-turbo engine is a substantial modification of both “TwinPower” turbo chargers used by BMW. In co-operation with the compressor manufacturer ASA which can rely on 20 years experience in developing and producing radial compressors (basically, radial compressors are turbo charger compressor units which are put into motion by the crankshaft via a belt driven transmission), the performance of both turbo chargers was significantly improved without affecting their endurance.

As a result, the maximum boost pressure of 0.5 bar (relative) rises to 0.9 bar (relative). Flanking measures at the engine ensure that the increasing boost pressure can also be transformed into according extra power. Therefore, additional 181 hp (133 KW) are gained which enhance the overall performance to strong 725 hp at 5,500 r.p.m and render the maximum torque of 1000 Nm at already 2,000 r.p.m. In order to achieve this impressive extra performance, larger injection valves and an entirely new exhaust system for the reduction of dynamic pressure including the therefore necessary sports catalysers have been added, et al. A re-programmed engine control and significant modifications at BMW´s serial 8-speed transmission perfect the overall package harmoniously.

The enormous performance potential of the BMW V12 bi-turbo engine modified by G-POWER allows the G-POWER 760i driving performances which catapult it into the top range of its vehicle class. The acceleration from 0 to 100 km/h only takes 4.2 seconds. After 11.9 seconds, already 200 km/h are achieved. The top speed is 345 km/h.

But not only due to its enormous performance, the G-POWER 760i STORM propels to the top of its vehicle class, also the visual appearance of the aerodynamics kit which was exclusively developed for the STORM by G-POWER, underlines the exceptional quality of this G-POWER Supercar. Thereby, the aerodynamics pack in the brand-typical design is not only an end in itself, but it also improves the cold air supply to the cooling water and oil coolers at the vehicle front due to the enlarged air inlets at the front skirt and the vent holes in the bonnet. Due to these changes, the overall cooling performance has been increased by approx. 15 percent – a basis for the thermally always harmless performance enhancement.

The most outstanding component of the G-POWER aerodynamics kit for the BMW 760i, is the strikingly styled front skirt made of carbon fibre which entire replaces the original part. It gives the serially unobtrusive front of the current BMW 7-model the necessary aggressiveness which an automobile with 725 hp and a top speed of 345 km/h requires. Due to the elaborate shape, the aerodynamic lifting forces at the front axles were able to be reduced. Another highlight is the G-POWER STORM bonnet made of Kevlar hybrid which has a central Venturi engine compartment ventilation for the operation and two lateral ABS grids for the ventilation when the car stands still and guarantees an improved discharge of hot air from both turbo chargers out of the engine compartment and shapes the new face of the BMW 760i.

The G-POWER full carbon add-ons for the serial side skirts and the doors render a visual harmonious connection between the wheel houses by visually stretching the silhouette of the BMW 7-model. The wheel houses themselves are filled with forged three-part G-POWER SILVERSTONE RS aluminium wheels measuring 9.5x22 and 10.5x22 inches which are equipped with high-performance tyres of the development partner Michelin in the dimensions 265/30 ZR 22 at the front axle and 295/25 ZR 22 at the rear axle. Set up this way, the G-POWER 760i STORM always renders an optimal traction and a sporty handling which is additionally improved by the G-POWER sports spring set and a lowering by 30 mm.

At the rear, a full carbon rear spoiler and a full carbon diffuser which elegantly emphasise the 4 x 100 mm end pipes with integrated G-POWER logo generate more downforce at the rear axle and at the same time visually enhance the back section.

G-POWER refines the interior of the BMW 760i with exclusive accessories such as an ergonomically shaped sports steering wheel, a speedometer in G-POWER design and fine carbon rails for the side casing, central console and dashboard. Further customer wishes for exclusive interiors can always be fulfilled by the G-POWER manufactory with all possible leather- and ultra-suede colours.

The G-POWER 760i STORM is only available in a strictly limited small edition of only 10 automobiles world-wide and is offered at an overall price of € 365,000 (net) from the G-POWER manufactory in Autenzell. The long version G-POWER 760iL STORM F02 can be obtained at a surcharge of € 10,000.

Thereby, the HAMANN technicians profit from hundreds of successful motor sports participations. The competence which was gained there is the basis for the development of new HAMANN products and renders the highest level for product quality and processing. The result: stainless steel exhaust systems with a sporty and earthy sound, aerodynamics components reducing the lifting forces and striking light alloy rims from 19 to 22 inches. Interiors perfectly fitted with leather and combined with floor-mats in matching colours as well as non-slip aluminium pedals extend the accessory range.

Already when establishing the design, HAMANN perfectly adjusts the individual components of the aerodynamic pack. The result is an exciting styling with an optimised air flow across the car silhouette. LED daytime running lights which are integrated in the new front skirt, render a sporty-dynamic look and increase the passive safety. Simultaneously, in combination with the roof spoiler and the rear spoiler, the lifting forces are reduced and give the upper class limousine a new, attractive overall appearance. The visual connection between the front and rear part are the HAMANN side skirts which are available for the model series F01. The optionally available rear shield insert for the side skirt of the model 730d and 740i allows fitting the four-pipe sport end muffler. Four round stainless steel end pipes with a diameter of 90 millimetres perfectly enhance the rear part of the 7-series BMW and produce a powerful, earthy sound.

A performance enhancement for the Diesel engine with variable turbine geometrics is already under construction. By this first tuning stage the serial measure of the 730d (180 kW / 245 hp) increases by approximately 33 kW/45 hp.

A technical highlight of the offered tuning programme is the one-piece HAMANN-aluminium wheel called DESIGN HM EVO 22 inches. A hallmark of the modern styling is the glossy black paint with the diamond-grinded rim star and the discreet deep rim well. Five elongated and over-vaulted triple spokes document visual and technical finesse. Struts inside the spokes render additional stability. Modern production processes and the use of special aluminium alloys guarantee highest bearing loads at a low weight. Here, HAMANN recommends the dimensions 9.0Jx22 inches with 265/30ZR22 tyres at the front axle and 10.5Jx22 inches with 295/25ZR22 tyres at the rear axle.

The four progressively coiled chassis springs which lower the centre of gravity with the models 730d, 740i by 40 millimetres at the front- and rear axles, render a dynamic appearance. For the models 750i and 750Li, there is a lowering kit consisting of two chassis springs and an evening kit.

In addition to the existing, serial interior equipment, HAMANN accessories made first-class aluminium, pedals and foot-rests render motor sports air and perfectly match the embroidered HAMANN floor mat set. If desired, even a complete leather equipment can be produced with expert precision.

"The new model is certainly the most dynamic 7-series ever, so we've only made subtle changes to the outline", explains AC Schnitzer Chief Designer Michele Viandante. His philosophy: "Our accessories set important accents and emphasise the sporting characteristics of the saloon in a targeted manner." These are already written large in the imposing front, which is emphasised by a new AC Schnitzer spoiler element. Michele Viandante's tip: The through lip elongates the front and gives the car a faster look.

Like all accessories from AC Schnitzer, it is made of very hardwearing, well-fitting PU RIM. Subtle but striking also describes the effects of the side enhancements: "The result must be a harmonious ensemble, and not a combination of trainers and tuxedo", says Viandante. The AC Schnitzer side skirts attachments emphasise the car's wheelbase and lengthen it visually, giving it a more purposeful appearance. Towards the rear third, they are lifted and widened to give the car a more muscular look.

This is no bluff, because the new 7-series has plenty of power under the bonnet in every version, even when the music's playing at the back. The sight of AC Schnitzer tailpipes is as striking as the sound: two exhaust channels come together in a slightly rounded, chromed trapezoid trim - all very individual. But that's not enough for sporting attributes. Between the exhausts, Michele Viandante has introduced a further spoiler element which with its diffuser style symbolises pure dynamics. Only the subtle boot spoiler and rear roof spoiler remain to complete the look.

AC Schnitzer knows how to enhance a saloon's sporting aura without losing its elegance. Then the final touch is down to customer taste:

There's a choice of countless exciting AC Schnitzer wheels for the new 7-series. Two particularly striking examples: the Type V alloy with its clear, transparent five-spoke design, which celebrates its world premiere in 22" on the 7-series and is also available for X5 and X6. Or the multispoke Type VII, also available in 22". Both versions not only show true greatness, but constitute the perfectly balanced combination of performance and elegance. A characteristic which is symbolic of the entire car.